| PART |
Description |
Maker |
| A4957 |
The A4957 is a full-bridge controller for use with external N-channel power MOSFETs and is specifically designed for applications with high-power inductive loads such as brush DC motors.
|
Allegro MicroSystems
|
| RE030 |
1.75V to 2.1V. rated for loads up to 180 mA in full power mode and 5 mA in low power mode. It is designed to be integrated with other analog cells
RE030 is a dual mode Low Drop Out (LDO) voltage regulator macrocell with programmable output voltage ranging from 1.75V to 2.1V, rated for loads up to 180 mA in full power mode and 5 mA in low power mode. It is designed to be integrated wi
|
Atmel
|
| L9823 |
OCTAL LOW-SIDE DRIVER FOR BULB, RESISTIVE AND INDUCTIVE LOADS WITH SERIAL INPUT CONTROL, OUTPUT PROTECTION AND DIAGNOSTIC
|
ST Microelectronics
|
| L982605 L9826TR |
Octal Low-Side Driver for Resistive and Inductive Loads with Serial/Parallel Input Control, Output Protection and Diagnostic
|
STMicroelectronics
|
| BTS410E2 BTS410E2-13 |
Fast demagnetization of inductive loads
|
Infineon Technologies A...
|
| ZXLD1350 |
The ZXLD1350 is a continuous mode inductive step-down converter, designed for driving single or mult
|
Zetex Inc.
|
| REC-10LA |
Precision Linear Transducers, Designed for Mount in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element, Designed for High Pressure Chamber of Small Cylinders, Equipped with Glass-Sealed Electrical Outputs
|
Vishay
|
| 972AA4WI-D3P-LF7-S18 973AA3WI-A5T-LF5-037 973AA3II |
PROXIMITY SENSOR-INDUCTIVE, 7-7mm, 0-200mA, CYLINDRICAL
PROXIMITY SENSOR-INDUCTIVE, 5-5mm, 5-500mA, CYLINDRICAL
PROXIMITY SENSOR-INDUCTIVE, 3-3mm, 5-500mA, CYLINDRICAL
|
Data Device, Corp.
|
| U2352B |
PWM Power Control for DC Loads
|
Atmel
|
| BK8500 |
DC Electronic Loads 8500 series
|
List of Unclassifed Manufacturers
|
| RE024 |
RE024 [Updated 2/03. 11 Pages] A dual mode Low Drop Out (LDO) voltage regulator macrocell with a fixed 2.8V output voltage. rated for loads of up
A dual mode Low Drop Out (LDO) voltage regulator macrocell with a fixed 2.8V output voltage, rated for loads of up to 160 mA and as low as 5 mA. A typical application is radio section supply in mobile terminals.
|
Atmel
|
| DS11-1002 DS11-1000 DS11-1003 DS11-1Y DS11-1001 |
DC solid state relay for loads up to 2A @ 60Vdc
|
Tyco Electronics
|
